Monday, July 22, 2019
United States Constitution Essay Example for Free
United States Constitution Essay In May 1787, the oldest federal Constitution was framed by a gathering of the 12 State delegates. The four-month convention was headed by George Washington that eventually resulted to the drafting of the first federal constitution. The said Constitution went into effect on the first Wednesday in March 1789. First Amendment of the United States Constitution ââ¬Å"Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the government for a redress of grievances. â⬠The First Amendment freedoms are largely in threat when the administration seeks to justify its laws, or control thought for that unacceptable end. The freedom to think is the foundation of freedom, and speech must be guarded from the government since speech is the foundation of thought. In the earlier jurisprudence of Whitney v. California, 274 U. S. 357 (1927), United States Supreme Court Justice Louis D. Brandeis wrote in his decision that ââ¬Å"Men feared witches and burnt women. It is the function of speech to free men from the bondage of irrational fears. â⬠The citizens of the country shall not be abridged or divested of their right to speak, right to write, or the right to publish their opinions; and the liberty of the press, as one of the massive barricades of freedom, shall not be violated. More than the constitutional safeguard, the First Amendment is one of the countryââ¬â¢s primary cultural and normative symbols. It reflects very important features of the American character and is the foundation of the countryââ¬â¢s independence. Fourth Amendment of the United States Constitution ââ¬Å"The right of the people to b secure in their persons, houses, papers, and effects, against unreasonable searches and seizures, shall not be violated, and no Warrants shall issue, but upon probable cause, supported by Oath or affirmation, and particularly describing the place to be searched, and the persons or things to be seized. â⬠The right is maintained sacred and inexpressible in all occurrences where it has not been abridged or taken away by some public law for the good of all. Every incursion of private property, be it ever so slight, is considered a trespass. It is a fundamental rule in our justice system today that no person can set foot upon another personââ¬â¢s ground without the latterââ¬â¢s authorization; otherwise he will be liable to the encroachment though the harm be nothing (U. S. Government Printing Office, n. d. , p. 1287). Individuals who have had their privacy invaded or have been unlawfully arrested will generally have a tort action on hand under common or State statutory law. It is therefore advisable that police officers must, whenever possible, acquire advance judicial authorization of searches and seizures through a procedure of warrant. On the other hand a police officers performing under colour of state law who infringe an individualââ¬â¢s Fourth Amendment rights are subject to a legal complaint for damages and other remedies in federal courts under a civil rights statute. However, police officers have existing accustomed common-law justifications, most significant of which is the allegation of good faith. Fifth Amendment of the United States Constitution ââ¬Å"No person shall be held to answer for a capital, or otherwise infamous crime, unless on a presentment or indictment of a Grand Jury, except in cases arising in land or naval forces, or in the Militia, when in actual service in time of War or public danger; nor shall any person be subject for the same offence to be twice put in jeopardy of life or limb; nor shall be compelled in any criminal case to be a witness against himself, nor be deprived of life, liberty, or property, without due process of law; nor shall private property be taken for public use, without just compensation. â⬠All people are extended with the protection of indictment by grand jury except those serving in the armed forces. Regular armed forces personnel are subject to court martial instead of trial by jury or grand jury indictment. A person can be tried only upon the indictment as established by the grand jury, and particularly upon the indictmentââ¬â¢s language established in the instrumentââ¬â¢s charging part. Primary function of grand juries is their investigative role, which is presented generally through the summons they served the witnesses and requiring the latter the production of evidence and testimony (Find Law, 2008, n. p. ). Conversely the constitutional prohibition against double jeopardy is intended to safeguard a person from being placed to the exposures of trial and potential conviction more than once for an alleged crime. The State with all its power and resources should not be tolerated to make repeated efforts to convict an individual for an alleged offence, thereby exposing him to shame, ordeal and expense and requiring him to live in a continuing condition of insecurity and anxiety as well as increasing the potentiality that even though innocent he may be declared guilty. Self-incrimination is rooted on the maxim ââ¬Å"nemo tenetur seipsum accusare,â⬠or simply means that ââ¬Å"no man is bound to accuse himselfâ⬠(Find Law, 2008, n. p. ). The privilege was designed to safeguard the innocent and to promote the search for truth. The exclusive concern of the right against self-incrimination is with the risk to a witness compelled to offer testimony leading to the infliction of punishments attached to the criminal acts. Finally, property which is owned privately shall not be taken by the government for a public use without just compensation. It was intended to prevent Government from forcing some people to single-handedly put up with public burdens which, in all justice and fairness, should be borne by the whole public. Sixth Amendment of the United States Constitution ââ¬Å"In all criminal prosecutions, the accused shall enjoy the right to a speedy and public trial, by an impartial jury of the State and district wherein the crime shall have been committed, which district shall have been previously ascertained by law, and to be informed of the nature and cause of the accusation; to be confronted with the witnesses against him; to have compulsory process for obtaining witnesses in his favor, and to have the Assistance of Counsel for his defence. â⬠This guarantee can be attributed to the upholding of the rights of and prevention of injuries to both society and defendants. The provision is a significant protection to deter oppressive and undue imprisonment previous to trial, to reduce concern and anxiety accompanying public accusation and to minimize the potentiality that long postponement will weaken the capacity of an accused to protect himself. The right of an accused to confront the witnesses against him is to avoid depositions of ex parte affidavits being employed against the accused in lieu of a cross-examination and personal examination of the witness in which the accused has a chance of testing and straining the conscience and recollection of the witness. The confrontation would also oblige the witness to stand in person with the jury in order that the latter may look at the witness, and evaluate the witnessââ¬â¢ conduct upon the manner and the stand in which the testimony is offered. The provision which affords the defendant the right to legal process is designed to compel witnesses to appear during the trial. The right to present the statement of witnesses, and to require their attendance, if essential, is in simple terms the right to present a defence, the right to present each of the defendant and prosecutionââ¬â¢s side of the facts to the jury so it may make a decision where the truth lies. Fourteenth Amendment of the United States Constitution ââ¬Å"Section. 1. All persons born or naturalized in the United States and subject to the jurisdiction thereof, are citizens of the United States and of the State wherein they reside. No State shall make or enforce any law which shall abridge the privileges or immunities of citizens of the United States; nor shall any State deprive any person of life, liberty, or property, without due process of law; nor deny to any person within its jurisdiction the equal protection of the laws. Section. 2. Representatives shall be apportioned among the several States according to their respective numbers, counting the whole number of persons in each State, excluding Indians not taxed. But when the right to vote at any election for the choice of electors for President and Vice President of the United States, Representatives in Congress, the Executive and Judicial officers of a State, or the members of the Legislature thereof, is denied to any of the male inhabitants of such State, being twenty-one years of age, and citizens of the United States, or in any way abridged, except for participation in rebellion, or other crime, the basis of representation therein shall be reduced in the proportion which the number of such male citizens shall bear to the whole number of male citizens twenty-one years of age in such State. Section. 3. No person shall be a Senator or Representative in Congress, or elector of President and Vice President, or hold any office, civil or military, under the United States, or under any State, who, having previously taken an oath, as a member of Congress, or as an officer of the United States, or as a member of any State legislature, or as an executive or judicial officer of any State, to support the Constitution of the United States, shall have engaged in insurrection or rebellion against the same, or given aid or comfort to the enemies thereof. But Congress may by a vote of two-thirds of each House, remove such disability. Section. 4. The validity of the public debt of the United States, authorized by law, including debts incurred for payment of pensions and bounties for services in suppressing insurrection or rebellion, shall not be questioned. But neither the United States nor any State shall assume or pay any debt or obligation incurred in aid of insurrection or rebellion against the United States, or any claim for the loss or emancipation of any slave; but all such debts, obligations and claims shall be held illegal and void. Section. 5. The Congress shall have power to enforce, by appropriate legislation, the provisions of this article. â⬠Section one prevents the United States Government from expatriating United States citizens against their will. Once citizenship is acquired, it cannot be diluted, cancelled, or shifted at the will of the States, the Federal Government, or any other government unit. However, citizens of the United States within the implication of the provision must be natural persons and not artificial persons as the latter is a corporate body which is not a citizen of the country. Section two creates rules for the allocation of Representatives in Congress to States, necessarily counting all inhabitants for apportionment and decreasing apportionment if a state wrongfully disallows a person his right to vote. Nevertheless, the provision calling for the House representationââ¬â¢s proportional decreases for States that disallowed men 21 and older the right to vote was by no means implemented, notwithstanding the fact that Southern States prevented several Blacks from voting before the passage in 1965 of the Voting Rights Act. Section two was the consequential settlement as it placed Southern States to a choice; that is enfranchise Black voters or lose representation in congress. The said section presents a special remedy of reducing representation in order to alleviate a particular form of electoral exploitation of disenfranchisement of Blacks. Section three avoids the appointment or election to any State or federal office of any person who had assumed any of certain offices and thereafter engaged in treason, insurrection, or rebellion. Nevertheless, a two-thirds vote by Congress can reverse the said restriction. On the other hand Section four validated that neither the United States or any other State would compensate damages for the loss of slaves, or amount outstanding that had been incurred by the Confederacy. Conclusion The United States Constitution has been amended to incorporate a list of rights collectively identified as the Bill of Rights. The Bill of Rights plays an essential role in American government and law, and remains a central symbol of the culture and freedoms of the nation. Clearly, the United States Constitution is designed to safeguard the countryââ¬â¢s administration of justice and every citizenââ¬â¢s fundamental securities. Reference Find Law. (2008). Indictment by Grand Jury. Retrieved September 5, 2008, from http://caselaw. lp. findlaw. com/data/constitution/amendment05/01. html#1 Find Law. (2008). Self-Incrimination. Retrieved September 5, 2008, from http://caselaw. lp. findlaw. com/data/constitution/amendment05/07. html#1 U. S. Government Printing Office. (n. d. ). Fourth Amendment. Retrieved September 5, 2008, from www. gpoaccess. gov/constitution/pdf2002/022. pdf
Sunday, July 21, 2019
Report On Bed Capacity Planning In Hospitals
Report On Bed Capacity Planning In Hospitals Nowadays, the number of medical treatment and medicines increases which allows a spectacular growth of the health care sector. Despite this development, the sector suffers from inefficient management and ineffective planning [15]. Managing patients, nurses and physicians is a difficult problem that needs to be solved. Hospital bed planning is a central problem that affects hospital capacity, health care quality and also management of nurses and physicians. During the last decades, hospitals are a non profit organization where the demand is not a primary concern for the manager of these hospitals. Today, many private hospitals are acting with a primary objective to satisfy the demand and to provide outstanding services to compete with other private hospitals [10]. The hospital is not just a medical care unit but also is providing hotel and transportation services. To insure competiveness of hospitals we need to improve the quality of services and to satisfy as much as we can the deman d. Therefore, hospitals need to look for their supply chain and how to manage it. In this report, we focus on the supply chain management of hospitals in Dubai. Dubais health services are internationally recognized and due to their high standard and their modern facilities equipment, are comparable to other developed countries. The location of hospitals in Dubai is strategic to ensure accessibility for patients. There are approximately 20 clinics and hospitals distributed across the Emirate. The ratio of clinics/hospitals to patients is 1:78,000. One of the more impressive practices of medical professionals in Dubai is the post-clinic, private medical call. These are considered as part of their responsibilities. Medical attention is provided, regardless of residency or nationality. In general, Dubai aims to improve the over-all wellbeing of its people. Its strategy is to provide patient-specific care. The most popular medical services provided by healthcare providers in Dubai include immunizations and vaccinations, psychiatric treatments, medical fitness examinati ons, community services (such as marriage and family counseling), adult and infant yoga therapy, rehabilitation, and education on health and nutrition. We focus on this report on Rashid private hospital in Dubai, UAE. We mainly present a multiple objective stochastic programming for the bed capacity planning taking into account the quality of the service and the stochastic demand in that hospital. In the next chapter, we present a general overview of the hospital supply chain in general before we present in chapter 3 some of the Rashid hospital operations. In chapter 4, we focus on hospital bed capacity planning in order to introduce to the multiple objective stochastic program that we are going to propose for Rashid hospital bed capacity planning. The obtained model is transformed in chapter 6 into its certainty equivalent and solved in chapter 7 using data from Rashid hospital. Chapter 2 Hospital supply chain 2.1. Introduction Health is defined as à ¢Ã ¢Ã¢â¬Å¡Ã ¬Ãâ¦Ã¢â¬Å"a state of complete physical, mental and social well beingà ¢Ã ¢Ã¢â¬Å¡Ã ¬Ã . The health care sector is an important sector as regards to the welfare of people. Health services require the synchronization of various resources, such as Human resources, medicines and medical equipment. In any organization, a supply chain must be designed in accordance with its mission. The mission of all hospitals includes the maximization of the level of patient care. The size of a hospital, geographical location, diversification, and the various specializations all affect the nature of care provided in a hospital and, therefore, the goals of its supply chain. The hospital chain may have some of the following goals [7]: To secure the availability of product , To Reduce the storage space and to maximize the patient care, To reduce time and cost of handling the medical team (nurse, pharmacist, physician) Minimize the stocks of inventory The main functions of hospital supply chain are defined as follows [7]: To allocate the main resources (technical platforms, beds, physicians, nurses ) and their location in the hospital. To plan for extra resource needed (medical staff, medical equipment), and to schedule the care activities. To organize transportation of patients and equipment. Generally, the hospital supply chain may be split into two parts (see Figure1): the external chain and the internal chain [14]. Fig 1: Hospital supply chain [15] 2.2. The external supply chain The external chain begins with companies specialized in the creation of the raw material (patent, drug, machinery, etc). The raw material can be materialized (machine, drug, etc.) or immaterialized (know how to cure). The manufacturer may itself be the creator or a company that works in relationship with him. In this case, the company is responsible for the duplication (making molecules on a large scale and add excipients or drug) for the test and for the control. Once the product is ready to be used and receives the necessary certifications, the role of the distributor is to place the product on the market. The market is generally formed by a central purchasing (WHO, national distributors, NGOs, etc) or individual (hospital, pharmacy, etc). Each health facility may maintain direct relations with manufacturers so that products pass through certain distributors. 2.3. The internal supply chain The health establishment is the last link in a supply chain consisting of manufacturers and distributors from various industries (medical supplies, pharmaceuticals, food, laundry, maintenance, etc). The supply chain within the hospital is complex. The size of the hospital, the geographical location, the diversification, various specializations, the high cost and perishable goods, all affect its supply chain. The first characteristic of the appropriate health care supply chain is its diversity in distribution channels. Inside the hospital, the hospital product is made up of items at low prices or high-prices and durable and perishable goods that are consumed in large or small quantities. A health institution is composed of five main activities that manage different types of flows to offer many services or products to patients. These activities are defined as follows: Intralogistics activities which are the fact that the hospital acquire, receives and distribute different supplies used in the service. The demand management that is the planning and the coordination between the different necessary resources. Operations and services given to the patient within the hospital from admission to discharge. External logistic represented by the medical follow-up for the patient. Services to the patient which are all auxiliary activities that are not linked to medical activities offered to the patient (gift shop, religious programs, etc). The supply chain within the hospital can therefore be presented as follows: 2.4. Conclusion The hospital supply chain must be developed for a specific product based on its unit cost, demand variability and the physical size. We can say that integration of the supply chain in the health care sector requires the synchronization of internal and external supply chains to each individual service. A good supply chain management within a hospital is necessary and must be performed efficiently Chapter 3 Operations in Rashid hospital 3.1. Introduction Rashid Hospital is a 454-bed general medical/surgical hospital in Dubai, the United Arab Emirates, and is a part of the Dubai Government Dubai Health Authority. Rashid Hospital is considered in Dubai as one of the first medical facilities for trauma, emergency, ambulatory care and critical care which provide a high-quality of services to all patients within the community. The Rashid hospital provides also leadership in the training and education of health care professionals. In the emergency, Rashid Hospital is considered as one of the most reputable and prominent medical centers in the Gulf region. It receives the majority of complicated case other hospitals are destined to Rashid hospital which coordinates also closely with the Dubai Civil Defense and Police for the training of emergency medical staff inside the airports In Rashid hospital, two types of admissions are used: the outpatient admission and the admission through emergency department 3.2. Outpatient registration This type of admission or registration is present in all hospitals and it can be defined as follows: An outpatient admission is presented when a patient is admitted to the hospital, surgical center or ambulatory center for a surgical or nonsurgical operation, therapeutic procedure or diagnostic procedure, that does not require an overnight hospital stay. The preparation for outpatient admission varies with each procedure [20]. In Rashid hospital, the responsible physician, the treating physician and the admitting physician are responsible of the admission procedure of the outpatient. The registration of the outpatient is done after the patient gets a discharge from the emergency department or the inpatient unit. This must is done by the physician who gives the patient an outpatient appointment for follow up with the required specialty. After that the patient will be transferred to the required specialty. The next step is the direct admission which must be done during the same day. The admitting physician/clinic nurse informs the case manager and the admission office that the patient requires admission, and then the admission of the concerned patient is linked with the availability of a bed. Next, the account department or the admission office informs the patient about charges for treatment as per the hospital payment policy. The clinic nurse will inform the patient about the admission conditions and about provisional diagnosis. But if the hospital cant find an available bed, the treating physician will give to the patient another appointment or ask for a transfer of the patient to another healthcare unit (if the case is urgent). In Rashid hospital, urgent case admission is directed to the emergency department. The admission in this department is different from the outpatient admission. In the next section, we are going to overview admissions procedures in the emergency department. 3.3. Admission through the emergency department This type of admission is different from the outpatient admission because patient must access directly to health due to the urgency of his/her case of illness. It can be defined as housing the patient in the hospital to provide special interventional procedure(s) or definitive treatment. We can distinguish three types of patients in this admission. First, the unstable patients who will suffer irreversible damage or loss of life if not admitted immediately. Second, the stable patients who are the patients that requires urgent treatment or interventional procedures(s) that cannot be accomplished on an outpatient basis. Third, patients are not suffering loss life or serious damage if not admitted [21]. In the emergency department, the emergency physician has to observe and to investigate to know if the patient needs admission and to refer the patient to the on call physician. The emergency physician and on call physician will decide about the required screening and diagnostic tests after examining/before admitting the patient. The emergency department must inform the case management about the admission, provisional diagnosis and level of care needed and check for the availability of bed. If there is no available bed in the selected department, the case manager can admit the patient temporarily in another department where bed is available (with adequate equipment). But if there are no available beds throughout the hospital, the case manager has to refer patient to another hospital. The patient flow in Rashid hospital can be presented as the following figure [10]: Bed flow in hospital 3.4. Rashid hospital departments At Rashid Hospital it exists many specialized medical and paramedical departments all equipped to receive all kinds of patients and also patients from neighboring hospitals. The existing specialities in this hospital are: Psychiatry Cardiology Gastroenterology General surgery Hematology Infectious disease Respiratory Neurosurgery Traumatologie Geriatric 3.5. Conclusion Rashid Hospital aims to provide an outstanding service to all outpatients and patients that are admitted through the emergency department. This aim cannot be achieved if the hospital has not the adequate capacity in terms of hospital bed and human resources (physicians and nurses). At the same time the hospital must run in profit to ensure the future of its activity. In this study we will try to answer this important question of hospital capacity planning in order to determine both the level of beds and the number of resources that Rashid hospital needs to satisfy the random demand. Chapter 4 Hospital capacity planning 4.1. Introduction The capacity is defined as the quantity of service that the health care institution must provide to satisfy patients need. Capacity management is related to the control of the impact of demand variability on the management of the health care institution. It concerns the good coordination of resources through the management of medical equipments, human resources and bed occupancy. Hospital capacity has long been an indicator of the importance of the hospital structure and for budget allocation [18]. The capacity planning is a component of the internal hospital supply chain. This planning is usually used to help hospitals, to do well their objectives which are: Trying to avoid an underestimating of the number of beds, planning for the future maintain a good service quality, optimize resource use, satisfy the requirements of internal and external security. 4.2. Bed capacity management In hospitals, capacity planning usually focuses on the total capacity of beds, the capacity of the surgical system, the allocation of beds for different services, equipment capacity, the ability of auxiliary services, and the number of staff and their competence [11]. Before we plan capacity in a hospital, the following issues must be clarified [1]: The length of the planning horizon (operational, tactical and strategic) The level of the provided care (primary, secondary) The type of care (provided to inpatient and / or outpatient) The quality, cost and types of available resources (physicians, nurses, technicians, rooms, beds, medical equipments and all what constitute an input for health) The hospital capacity depends not only on the number of beds, but also how these beds are used. The hospital capacity can be influenced by several factors: The geographic distribution of patients: each locality has its own hospital. The type of resources currently in use: a patient who wants to have a particular diagnosis by the nearest hospital must visit the hospital where it exist the necessary equipment. availability of nurses, physicians, and support equipment in the hospital Hospital bed management may affect cost, quality and accessibility of care. The daily management of beds is closely related to the management of the hospital. To properly determine the capacity of beds, we need to track the activities of hospital patients (admission, assignment, stay and leave) [12]. The essential role of the hospital bed manager is to ensure balance between supply and demand for hospital beds. Bed management has a long-term component, which is the choice of the overall number of beds as well as sharing among different departments, and a short-term component for the daily bed allocation to patients. We conclude that hospital beds are important measure to determine the hospital capacity. The bed management does not only affect the overall capacity but it also impacts on cost, quality and accessibility of care [8]. 4.3. Models for hospital bed capacity management Many models were elaborated to determine the optimal number of beds inside a hospital. The simple and the most used models to evaluate the adequate capacity of a hospital department are based on the following index: N = (length of stay * number of patient)/number of days = number of patient per day / number of days The transfer between departments and the randomness of some of the index parameters are not considered in the above model. To overcome this shortness in the index model more elaborate stochastic models can be used. These models can be used for the short term (daily problem), the long term (monthly problem) or even for the case of a disaster. The Queuing models are short term models that are usually related to the operational level of the hospital capacity planning. These models characterize the relationship between the number of beds, the average occupancy levels and the number of patients transferred from one department to another based on the arrival time of patients, the nature of patients transferred from one unit to another and the period of use of each type of bed by the patients. [13]. The simulation models have the ability to consider the results of a decision on an item without carrying out the experiment on the actual item [9, 19]. They represent an artificial reproduction of what will happen when random parameters change their values. Sally C. Brailsford [16] proposed a simulation model to plan for the capacity of an intensive care in hospital using software called SIMUL8. Nowadays, the health sector, an increasingly privatized sector, seeks to find an effective planning of his resources for the long term. Taking into account the benefit t and also the quality of offered service. The medical ethics and money profit are two conflicting criteria. Multiple objective programming is a model that can deal with several criteria. Chu and Chu [6] proposed a goal programming model for hospital beds allocation in Hong Kong. The model takes into account the constraints of location, the demand constraint and constraints related to manpower. Black and Carter modeled the problem of allocating physicians to hospital department using a linear goal programming model [3]. The model focuses on the number of cases handled by a physician taking into account that the hospital must be able to generate enough revenue to cover fixed costs and variable production. 4.4. Conclusion The models developed for the hospital bed capacity planning problem are mostly categorized as stochastic models. These models are suitable for short and medium term. In this study, we are more concerned with the long term. This is way we focus on multiple objective programming models to plan for the bed capacity in Rashid hospital. Chapter 5 The model In this document, we follow Ben Abdelaziz and Masmoudi model to determine the optimal bed capacity in Rashid hospital [2]. The model was first developed for bed capacity planning in all public Tunisian hospital to evaluate of missing beds. 5.1. Notations l: specialty in a hospital department, . We have two kinds of specialties. Those called primary health specialties for which we cannot transfer the patient to another hospital and secondary healthcare specialties that in case of no hospital bed available can be transferred to another hospital. : A subset of primary healthcare specialties that can be served by the same hospital bed (for which we are using the same equipment), . : A subset of secondary healthcare specialties that can be served by the same hospital bed, . : the set of specialties that may be served by the same type of nurses , : the set of specialties that may be served by the same type of physician , 5.2. The parameters : Existing beds in specialty in the hospital, . : the number of beds that can be added in the specialty in the hospital, . : ratio of nurses per bed, i.e. the number of nurses needed to serve one patient in the specialty l, . : ratio of physicians per bed: The number of physicians needed to serve one patient in the specialty l, . : the stochastic yearly demand for the specialty in the hospital where express the random demand. 5.3. Decision variables : number of beds in the specialty in the hospital. 5.4. Constraints of the model Maximum and minimum number of beds in the hospital The demand for the set of specialties in the hospital must be satisfied The demand for the set of specialties must be satisfied otherwise transferred to another hospital (1) where express the number of vacant beds in the set of specialties and the number of missing beds in the set of specialties . 5.5. Objective functions The first objective function is to minimize the cost of adding and managing new beds where is the daily cost of creating and managing an additional bed of the specialty in the hospital during the period of investment. The stochastic constraint (1) is related to the satisfaction of the demand in secondary health care specialties. This transfer generates an additional cost (transfer cost). We have to use a recourse approach to get certainty equivalent constraint. In a recourse approach a penalty in the objective function is generated when the solution does not satisfy the random constraint. Here the penalty is the transfer cost. The expected transfer cost is where is the expected transfer cost. The third group of objective functions is to minimize the number of nurses in the groups of specialities in the hospital The fourth group of objective functions is to minimize the number of physicians in the groups of specialities in the hospital 5.6. The final model The final model is expressed as the following multiple objective stochastic program 5.7. Conclusion To solve the above multiple objective program, we need to transform it into an equivalent mathematical program. This transformation must be done following the problem hypotheses. In the next chapter, we will review these hypotheses and we will provide a suitable transformation of the program (P) into its certainty equivalent program. Chapter 6 The certainty equivalent program 6.1. Introduction The program (P) is a stochastic program as it presents two stochastic constraints (P.5) and (P.6) and a multiple objective program as it has several objective functions to minimize. To solve a multiple objective stochastic program, we need to transform it into its certainty equivalent program, under predefined approaches. In the next sections and using a chance constrained approach for the constraint (P.5), a discretization technique for the constraint (P.6) and a goal programming approach to deal with the two objective functions (P.3), and (P.4), we are going to build such a certainty equivalent program to the program (P). 6.2. Chance constrained approach The chance constrained approach transforms the random constraint into a deterministic constraint by considering as feasible solution those satisfying the uncertain constraints with a predefined level of probability [4]. Therefore, under a chance constrained approach, the following stochastic linear constraint where , and are random variables, will be transformed into the following deterministic constraint where is fixed level of probability. It means that a feasible solution must satisfy the uncertain constraints for all scenarios with a probability of occurrence higher than . The constraint (P.5) expresses the satisfaction of the demand on primary health care specialties (the demand on these specialties cannot be transferred to another hospital). It is difficult and not justified to satisfy the demand for all scenarios and especially scenarios with a small probability of occurrence. In the following, we propose a chance constrained approach to deal with the constraint (P.5). Therefore, the demand on the primary health care specialties Ar must be satisfied with a given fixed probability level as follows (3) The constraint (3) is a chance constraint. Using the model hypotheses, the random daily demands are normally distributed with a mean of and standard deviation of . Note that, Then, we can rewrite the chance constraint (3) as follows 6.3. Discretization approach We must satisfy almost surely the constraint (P.6). In stochastic programming, the normal distribution is approximated by a discrete distribution and then the constraint (P.6) can be rewritten as follows: The total recourse cost and the monthly transfer cost for secondary health care specialities are transformed using the discretization of the normal distribution of demands as follows: 6.4. Goal programming approach Charnes and Cooper [5] are the first to introduce the goal programming approach which is essentially used to transform multiple objective linear program into a linear program. This transformation consists on these steps: First, to fix a target values for some or all objectives (called also goals) Second, to transform the objective functions to constraints and third minimizing the difference between objective functions value and these goals. Using a goal programming approach, the following objective functions can be transformed to constraints as follows where and are the negative and the positive difference, respectively, between the fixed goals and the achievement , and the new objective function to optimize is expressed as follows where and are weights of the negative and the positive deviation, respectively. The objective functions (P.3) and (P.4) minimize the number of nurses and physicians in each hospital. As the actual number of nurses and physicians can not be reduced, a goal programming approach is used to deal with objectives (P.3) and (P.4) where goals must be equal to the number of nurses and physicians already working in hospitals. Let us denote by and the number of nurses and physicians, respectively, who already work on the specialty in the hospital. We denote by and the goals for the objective functions (P.3) and (P.4), respectively, and are expressed as follows where is the number of nurses in shortage in the group of specialties in the hospital, is the number of nurses in excess in the group of specialties in the hospital, is the number of physicians in shortage in the group of specialties in the hospital and is the number of physicians in excess in the group of in the hospital. From these goal constraints the additional cost that gives monthly salary of new nurses and physicians is as follows: where is the nurse salary per month in the group of specialty in the hospital and is the physician salary per month in the group of specialty in the hospital. The monthly salary of nurses and physicians who work in hospitals is fixed. Now, as all objective functions represent yearly expenses, we propose to combine all cost objectives which are the yearly transfer cost, the yearly cost of creating and managing new beds and the yearly salary of new nurses and new physicians, into a single objective function expressed as follows: 6.5. The certainty equivalent Finally, under a chance constrained approach and a goal programming approach, the certainty equivalent program to the multiple objective stochastic program (P) is expressed as follows: (CE) 6.6. Conclusion The chance constrained and the goal programming approaches are used to generate the certainty equivalent program. Their use is motivated by the problem hypotheses. In the next chapter, we are going to test the model using real data from Rashid hospital. Chapter 7 The experimental study In this chapter, we discuss the results obtained by the previously presented model for hospital bed capacity planning using data from Rashid hospital. The data was obtained from the administration of the hospital and is related to a recent period (2009-2011). The quality of results here is highly linked to the quality of the input data. We are going in the following to report some of the data given to us as well as the model output. 7.1. Model parameters From the Rashid hospital we collected data related to the following parameters: Number of patients / specialty New admissions/ day Discharges / day Stay of every patient Number of Physicians / specialty Number of physicians / team Number of teams / specialty Number of hours worked by each physician Number of patients assigned to each team / day Number of nurses / specialty Number of beds / specialty A description of the system of operation of each specialty. In this document we cannot disclose the information that was given to us. We refer the reader to the manuals that the hospital published yearly and that are related to his yearly activity. 7.2. Lingo 12.0 To solve the linear programming (CE), we used the commercial software Lingo 12.0. Recently Lingo was ranked by INFORMS (www.informs.org) as one of the most valuable package for linear and nonlinear mathematical programming problems. For the mixed integer linear program (CE), Lingo uses a modified Branch and Bound algorithm [17]. 7.3. Hospital beds The Rashid hospital must have 467 beds in the total. It means that 15 supplementary beds must be added to the hospital. The number of optimal beds in each speciality is presented in the following table: Specialty Current number of beds Optimal PSYCHIATRY 46 46 CARDIOLOGY 74 74 GASTRO 9 9 GEN.SURGERY 84 84 HEMATOLOGY 4 4 IDU 23 23 RESPIRATORY 22 22 NEUROSURGERY 39 44 TRAUMA 104 114 GERIATRIC 47 47 TOTAL 452 467 Table 1: number of optimal beds Only two specialities require additional beds. These specialities are the Neurosurgery where 5 beds must be added and the trauma speciality which requires 10 additional beds. This difference between the optimal number of beds and the current beds is also represented with the following histogram: 7.4. Nurses The Rashid hospital needs to hire 3 additional nurses to the hospital to cover the demand. The optimal number of nurses per specialty is represented in the following table: Spec. Current number of Nurses Optimal PSYCHIATRY 12 14 CAR
Saturday, July 20, 2019
Optical Character Recognition (OCR)
Optical Character Recognition (OCR) INTRODUCTION 1.1. Optical Character Recognition: Optical Character Recognition (OCR) is the mechanical or electronic interpretation, reading of images of handwritten, typewritten or printed text (usually captured by a scanner or tablet) into machine-editable text. OCR is a playing field of research in pattern identification, artificial intelligence and machine vision. An OCR system enables you to take a book or a magazine article, feed it directly into an electronic computer file, and then edit the file using a word processor. All OCR systems include an optical scanner for reading text, and suave software for analyzing images. Most OCR systems use a mishmash of hardware (specialized circuit boards) and software to recognize characters, although some economical systems do it entirely through software. Advanced roman OCR systems can read text in large variety of fonts, but they still have difficulty with handwritten text. 1.2. History Of Optical Character Recognition: To comprehend the phenomena described in the above section, we have to look at the history of OCR [3, 4, 6], its improvement, recognition methods, computer technologies, and the differences between humans and machines [1, 2, 5, 7, 8]. It is always intriguing to be able to find ways of enabling a computer to ape human functions, like the ability to read, to write, to see things, and so on. OCR research and development can be traced back to the early 1950s, when scientists tried to confine the images of characters and texts, first by mechanical and optical means of rotating disks and photomultiplier, flying spot scanner with a cathode ray tube lens, followed by photocells and arrays of them. At first, the scanning operation was dawdling and one line of characters could be digitized at a time by moving the scanner or the paper medium. Subsequently, the contraptions of drum and flatbed scanners arrived, which extended scanning to the full page. Then, advances in digital-integrated circui ts brought photo arrays with higher solidity, faster transports for documents and higher speed in scanning and digital conversions. These vital improvements greatly accelerated the speed of character recognition and abridged the cost, and opened up the possibilities of processing a great range of forms and documents. Throughout the 1960s and 1970s, new OCR applications sprang up in retail businesses, banks, hospitals, post offices; insurance, railroad, and aircraft companies; newspaper publishers, and many other industries [3, 4].In parallel with these advances in hardware development, rigorous research on character recognition was taking place in the research laboratories of both academic and industrial sectors [6, 7]. Although both recognition techniques and computers were not that powerful in the in the early hours (1960s), OCR machines tended to make masses of errors when the print quality was poor, caused either by wide disparity in type fonts and roughness of the surface of the paper or by the cotton ribbons of the typewriters [5]. To make OCR work proficiently and economically, there was a big ram from OCR manufacturers and suppliers toward the standardization of print fonts, paper, and ink qualities for OCR applications. New fonts such as OCRA and OCRB were designed in the 1970s by the American National Standards Institute (ANSI) and the European Computer Manufacturers Association (ECMA), respectively. These special fonts were quickly approved by the International Standards Organization (ISO) to facilitate the recognition process [3, 4, 6, 7]. As an upshot, very high identification rates became achievable at high speed and at reasonable costs. Such accomplishments also brought better printing traits of data and paper for practical applications. Actually, they completely revolutionize the data input industry [6] and eliminated the jobs of thousands of keypunch operators who were doing the really mundane work of keying data into the computer. 1.3. Common Steps Of OCR Processing: The method of converting documents into electronic forms, which is usually referred to as digitization is undertaken in different steps. The process of scanning a document and representing the scanned image for further processing is called the pre-processing or imaging stage. The process of manipulating the scanned image of a document to produce a searchable text is called the OCR processing stage. 1.3.1. The Imaging Stage: The imaging procedure involves scanning the document and storing it as an image. The most popular image format used for this purpose is called Tagged-Image File Format (TIFF). The resolution (number of dots per inch dpi) determines the accurateness rate of the OCR process. 1.3.2. The OCR Process: The major steps of the OCR processing stage are shown below. 1.3.3. Distinguishing Between Text And Images Segmentation: In this step, the process of recognizing the text and image blocks of the scanned image is undertaken. The boundaries of each image are analyzed in order to identify the text. 1.3.4. Character Recognition Feature Extraction: This step involves recognizing a character using a process known as feature extraction. OCR tools stockpiles rules about the characters of a given script using a method known as the learning course. A character is then identified by analyzing its shape and comparing its features adjacent to a set of rules stored on the OCR engine that distinguishes each character. 1.3.5. Recognition Of Character: Following the character identification process, character detection process is performed by comparing the string of characters against an existing dictionary of words. Additional processes such as spell-checking are performed under this step. 1.3.6. Output Formatting: The finishing step involves storing the output in one of the industry standard formats such as RTF, PDF, WORD and plain UNICODE text. 1.4. Pattern Recognition: Pattern recognition (also known as classification or pattern classification) is a field within the vicinity of artificial intelligence and can be defined as the act of taking in raw data and taking an action based on the category of the data. It uses methods from statistics, machine learning and other vicinities. Typical applications of pattern recognition are: Automatic speech identification. Classification of text into numerous categories (e.g. spam/non-spam email messages). The automatic identification of handwritten postal codes on postal envelopes. The automatic identification of images of human faces etc. The preceding three examples form the subtopicimage analysis of pattern recognition that pact with digital images as input to pattern recognition systems. Some trendy techniques for pattern recognition include: Neural Networks(NN) Hidden Markov Models(HMM) Bayesian networks (BN) The application domains of pattern identification include: Computer Vision Machine Vision Medical Image Analysis Optical Character Recognition Credit Scoring. 1.5. Applications Of The Pattern Recognition: Pattern recognition has many useful applications. Some of them are outlined below. Utilizes as a telecommunication aid for deaf, in airline reservation, in postal department for postal address reading (both handwritten and printed postal codes/addresses) and for medical diagnosis. For use in customer billing as in telephone exchange billing system, order data logging, and automatic finger print identification, as an automatic inspection system. In automated cartography, metallurgical industries, computer assisted forensic linguist system, electronic mail, information units and libraries and for facsimile. For direct processing of documents as a multipurpose document reader for large scale data processing, as a micro-film reader data input system, for high speed data entry, for changing text/graphics into a computer readable form, as electronic page reader to handle large volume of mail. 1.6. Scope Of This Work: The Project is designed to classify and identify a scanned image containing Arabic characters using two pace approaches. In the first pace the Arabic text image is preprocessed. And in the second pace it features are extracted. During the itinerary of work it is assumed that there is no noise in the image and the image is flawlessly scanned with no deviation from its original angle no skewing. 1.7. Objectives And Applications Of This Work: Arabic Optical Character Recognition can open a novel way of realizing the dream of the natural mode of communication amid man and machine in this part of the world. It will inflate and multiply already available knowledge to new horizons. Centurys aged rare script in Arabic, Urdu and Persian will become available to common man. The ultimate goal of character recognition is to conjure up the human reading capabilities. Character recognition systems can contribute immensely to the advancement of the automation process and can improve the interaction among man and machine in many applications, including office automation, check verification and a large variety of banking, business and data entry applications, library archives, documents identifications, e-books producing, invoice and shipping receipt processing, subscription collections, questionnaires processing, exam papers processing and many other applications[9], beside online address and signboard reading. 1.8. Thesis Organization: The remaining part of this thesis is divided into four chapters. Chapter 2 describes review of literature. Chapter 3 describes Arabic script, its peculiarities and problems. Chapter 4 is regarding the development of Arabic Character identification and chapter 5 is about conclusions and future directions respectively. Chapter 2 REVIEW OF LITERATURE 2.1. Optical Character Recognition: Since the beginning of writing as a form of communication, paper prevailed as the medium for writing. Electronic media is replacing paper with time. Because it preserves space and is fast to access, electronic media are constantly gaining esteem. The convenience of paper, its pervasive used for communication and archiving, and the quantity of information already on paper, press for quick and accurate methods to automatically read that information and adapt it into electronic form [Albadr95]. The latent application areas of automatic reading machines are numerous. One of the earliest, and most thriving, applications is sorting checks in banks, as the volume of checks that circulates daily has proven to be too huge for manual entry. Other applications are detailed in the next section [Govindan90, Mantas86]. The machine imitation of human reading (i.e. optical character recognition) has been the subject of widespread research for more than five decades. Character identification is pattern recognition application with a crucial aim of simulating the human reading capabilities of both machine printed and handwritten cursive text. The currently available systems may interpret faster than humans, but cannot reliably read such a wide diversity of text nor consider context. One can say that a great quantity of further effort is required to, at least, narrow the gap between humans reading and machines reading capabilities. The practical significance of OCR applications, as well as the interesting nature of the OCR problem, has lead to great research interest and assessable advances in this field. Now, commercial OCR systems for Latin characters are commonly accessible on personal computers achieving recognition rates above 99% [McClelland91, Welch93]. Further, systems on the market can now inte rpret a variety of writing styles (e.g., hand-written, printed Omni-font), and character sets including Chinese, Japanese, Korean, Cyrillic, and Arabic. Since the 50s, researchers have carried out far-reaching work and published many papers on character recognition. Nearly all of the published work on OCR has been on Latin, Japanese or Chinese characters. This has started since the median 40s for Latin, the middle of the 1960s for Chinese and Japanese. The following are positive surveys and reviews on Latin character recognition. Reference may be made to [Mori92] for historical appraisal of OCR research and development. The survey of [Govindan90] includes surveys of other languages; [Mantas86] has an overview of character identification methodologies, [Impedovo91] on commercial OCR systems, [Tian91] on machine-printed OCR, [Tappert90, Wakahara92] for on-line handwriting identification. [Suen80] has a survey on automatic identification of hand printed characters (viz. numerals, alphanumeric, FORTRAN, and Katakana), while [Nouboud90] produced a review of the recognition of hand-printed (non-cursive) characters and conducted beta tests on a business system. [Bozinovic89, Simon92] surveyed off-line cursive word recognition, Jain et al [Jain2000] reviewed statistical pattern recognition methods, and [Plamondon2000] comprehensive survey of online and offline handwriting identification. Two bibliographies of the fields of OCR and document scrutiny appeared in [Jenkins93, Kasturi92]. [Stallings76, Mori84], produced surveys on identification of Chinese machine- and hand-printed characters, respectively, and Liu et al [Liu2004] addressed the state of the art of online identification of Chinese characters. 2.2. General Review Of Arabic Character Recognition: Although almost one billion people world-wide, in several diverse languages, use Arabic characters for writing (Arabic, Persian, and Urdu are the most noted examples), Arabic character identification has not been researched as thoroughly as Latin, Japanese, or Chinese. The first published work on Arabic character acknowledgment may be traced back to 1975 by Nazif [Nazif75] in his masters thesis. In his thesis a system for the identification of printed Arabic characters was developed based on extracting strokes that he called radicals (20 radicals are used) and their positions. He used correlation between the templates of the deep-seated and the character image. A segmentation phase was included to segment the cursive text. Years later Badi and Shimura [Badi78, Badi80] and Noah [Nouh80] toiled on printed Arabic characters and Amin [Amin80] on hand-written Arabic characters. Surveys on AOTR may be referred in [Amin85a, Amin98, Shoukry89, Jambi91, Albadr95, Nabawi2000, Ahmed94]. On-line systems are restricted to recognizing hand-written text. Some systems recognize remote characters [Ali89, Amin80, Amin85b, Amin87, ElSheikh89, ElSheikh90b, ElWakil87, ElWakil89, Saadallah85] and hand-written mathematical formulas [ElSheikh90c, Amin91b], while others recognize cursive words [Badi78, Badi80, Badi82, Amin82a, Amin82b, Shaheen90, AlEmami90]. Since the segmentation problem in Arabic is non-trivial the concluding systems deal with a much harder problem. While several off-line systems use video cameras to digitize pages of text (e.g., [Abbas86, Goraine92, Amin86, HajHassan85, HajHassan90, Nouh80, Nouh87, Nouh89, Sarfraz2003, Sarfraz2004]), the inclination now is to use scanners with resolutions ranging from 200 to 400 dots per- inch (e.g., [AbdelAzim89c, AbdelAzim90a, AlYousefi88, Amin91a, Bouhlila89, ElDabi90, ElSheikh88a, Ramsis88, Sarfraz2003a, Sarfraz2003b, Zidouri2002, Zidouri2005]). Scanners set up less noise to an image, are less pricey, and more convenient to use for character recognition, especially when coupled with automatic document feeders, automatic Binarization, and image enhancement. Among the off-line systems that identify hand-written isolated characters are [Abuhaiba90, AlYousefi90, AlTikriti85, ElDesouky92, Hyder88]. [Abbas86, AbdelAzim89b, Goneid92] identify hand-written Arabic (Hindi) numerals, and [Badi80, Badi82, Goraine92, Jambi92, Zahour91] distinguish hand-written words. The majority of off-line systems distinguish typewritten cursive words [AbdelAzim89c, AbdelAzim90a, Bouhlila89, ElDabi90, Amin86, ElKhaly90, ElSheikh88b, Goraine89, Khella92, Margner92, Nazif75, Nouh87, Ramsis88, Tolba89, Tolba90, ElRamly89c, HajHassan90, HajHassan91], while [ElShiekh88a, Mahdi89, Mahmoud94, Nouh80, Nouh89, NurulUla88, Fayek92, Sarfraz2005d, Zidouri2005] identify only typewritten isolated characters. The systems of [Abdelazim90b, AlBadr92, ElGowely90, Kurdy92, Fakir93] are intended to recognize typeset words. One of the systems [Abdelazim89a] recognizes bilingual (Arabic/Latin) typewritten words. Examples of systems for detection of other languages that use Arabic scri pt are [Parhami81, Yalabik88, Hyder88], which are designed for the identification of Persian, Ottoman (Old Turkish), and Urdu, respectively. 2.3. Applications Of Optical Character Recognition: Optical character recognition technology has many practical applications that are independent of the treated language. The following are some of these applications: Financial Business Applications: For cataloging bank checks since the number of checks per day has been far too large for manual arrangement. Commercial Data Processing: For inflowing data into commercial data processing files, for example inflowing the names and addresses of mail order customers into a database. In addition, it can be worn as a work sheet reader for payroll accounting. In Postal Department: For postal address reading, cataloging and as a reader for handwritten and printed postal codes. In Newspaper Industry: Premium typescript may be read by recognition equipment into a computer typesetting system to keep away from typing errors that would be introduced by keypunching the text on computer peripheral equipment. Use By Blind: It is used as a reading abet using photo sensor and tactile simulators, and as a sensory aid with sound output. Additionally, it can be worn for reading text sheets and reproduction of Braille originals. In Facsimile Transmission: This procedure involves transmission of pictorial data over communications channels. In practice, the pictorial data is mainly text. Instead of transmitting characters in their pictorial representation, a character identification system could be used to recognize each character then transmit its text code. Finally, it is worth to say that the major potential application for automatic character identification is as a general data entry for the automation of the work of an ordinary office typist. 2.4. Development Of New OCR Techniques: As OCR research and development advanced, demands on handwriting identification also increased because a lot of data (such as addresses written on envelopes; sums written on checks; names, addresses, identity numbers, and dollar values written on invoices and forms) were written by hand and they had to be pierced into the computer for processing. But early OCR techniques were based generally on template matching, simple line and geometric features, stroke detection, and the extraction of their derivatives. Such techniques were not classy enough for practical identification of data handwritten on forms or documents. To cope with this, the Standards Committees in the United States, Canada, Japan, and some countries in Europe designed some handprint models in the 1970s and 1980s for people to write them in boxes [7]. Hence, characters written in such specified shapes did not diverge too much in styles, and they could be recognized more easily by OCR machines, especially when the data were pierced by controlled groups of people, for example, employees of the same company were asked to write their data like the advocated models. Sometimes writers were asked to follow certain bonus instructions to enhance the quality of their samples, for example, write big, close the loops, use simple shapes, do not link characters, and so on. With such constraints, OCR detection of handprints was able to flourish for a number of years. 2.5. Recent Trends And Movements: As the years of exhaustive research and development went by, and with the birth of several new conferences and workshops such as IWFHR (International Workshop on Frontiers in Handwriting Recognition), 1 ICDAR (International Conference on Document Analysis and Recognition), 2 and others [13], identification techniques advanced rapidly. Moreover, computers became much more authoritative than before. People could write the way they normally did, and characters need not have to be written like specified models, and the subject of unimpeded handwriting recognition gained considerable momentum and grew swiftly. As of now, many new algorithms and techniques in pre-processing, feature extraction, and powerful classification methods have been urbanized [8, 9]. Chapter 3 ARABIC A CURSIVE SCRIPT 3.1. Arabic: Arabic is a semantic language used as principal language in most countries. Arabic is vocalized by 234 million people [9] and essential in the culture of many more. While spoken Arabic varies across region, written Arabic, sometimes called Modern Standard Arabic (MSA), is a uniform version used for official communication across the Arab world [9]. The characters of Arabic script and similar character are used by a much higher entitlement of the worlds population to write language such as Arabic, Farsi, Persian and Urdu. Thus the ability to automate the understanding of written Arabic would have wide spread benefits. Arabic is normally written in the calligraphic Nastaliq script, whereas Naskh is more commonly used. Usually, bare transliterations of Arabic into Roman letters exclude many phonemic elements that have no counterpart in English or other languages commonly written in the Roman alphabet. National Language Authority of Pakistan has developed numeral systems with specific notations to signify non-English sounds, but these can only be appropriately read by someone already familiar with Urdu, Persian, or Arabic for letters such as ? ? ? ? or ? and Hindi for letters. Most of Arabic characters when pooled form a degree of about 45 to the horizontal line because of which Arabic script reading is faster than roman script but on the other hand it makes it harder for the greenhorn readers and the machines to identify the word or segment one character from the rest. Unlike the English script there is no capital or small characters in Urdu, but the last character of a word can be measured as a capital character as in many cases it presents the full form of the character and the characters at early and middle positions are considered as small. Every character has an impartial shape besides different joining forms, but some of the alphabet like the characters making the word Urdu (? ? ? ?) or of the similar category are not joinable or cannot be connected. Arabic alphabet utilizes consonant letters, vowels, diacritic marks, numerals, punctuations and a few superscripts signs. The graphical representation of each alphabet has surplus one form depending on its position and context in the word. In general each letter has four forms that is beginning, middle, final and standalone as shown in table 3.1. 3.2. Arabic Letters: The Arabic alphabet contains 28 letters. Each has between two and four shapes and the choice of which shape to use depends on the situation of the letter within its word or sub word. The shape correspond to the four positions: beginning of a (sub) word, middle of a (sub) word. End of a (sub) word and in isolation. Table 3.1 shows each shape for each letter. Letters without initial shapes are purely their isolated shapes, and their medial shapes are their final shapes. Some letters have descanters or ascenders which are position that extend below the primary line on which the letters sit or above the stature of most letters. Theres no upper or lower case, but only one case. Arabic script is written from right to left, and Letters within a word are usually joined even in machine print. Letter shapes and whether or not to connect depend on the letter and its neighbors. Letters are connected at the same virtual height. The baseline is the line at the height at which letters are allied, and it is akin to the line on which some an English word sits. Letters are wholly above it except for decanters and some markings. Theres no association between separate words. So word boundaries are always represented by a breathing space. Six letters, however, can be allied only on one side. When they occur in the middle of a word, the word is divided into manifold sub-words separated by space. A ligature is a word shaped by combining two or more letters in an accepted manner. Arabic has numerous standard ligatures, which are exception to the above rules for joining letters. Most common is laam- alif, the combination of laam and alif and other include yaa-meem. 3.3. Problems Of Arabic Script: Despite a huge character set Arabic has a small set of characters which are easily discernible from one another. The remaining character fluctuates from these character using dots or symbols above or below these shapes [19]. The table 3.2 shows group of similar characters and their derived forms. As shown above table 3.2, only 21 different groups exits out of 32 character set. It will complicate the identification phase of Arabic characters. Further study of other forms ( initial, middle and final ) of these character divulges that ein( ) is analogous to hamza(?), wow (?) might be perplexing with (?) , ze (?) resembles noon () and mem(?) can be baffled with middle form of ein () and with stand alone goal-he (?). A key distinction between Latin scripts and Arabic script is the fact that many letters only differ by a dot(s) but the primary stroke is exactly the same. [19] 3.4. Others Problems In Arabic OCR: All Muslims (almost à ¼ of the people on the earth) can read Arabic because it is the language of Al-Quran, the holy book of Muslims. Even though, Arabic script identification has not received enough welfare by the researchers. Little research progress has been accomplished comparing to the one done on the Latin and Chinese. The elucidations available in the market are still far from being perfect [11, 14]. There are few raison dà ªtres led to this result. Require of financial support and platform accessible from any government (official language of countries). lack of ample support in terms of journals, books etc. and lack of interaction between researchers in this playing field; lack of broad-spectrum support utilities like Arabic text databases, dictionaries, programming tools, and supporting staff; belatedly start of Arabic text identification (first publication in 1975 compared with the 1940s in the case of Latin character recognition); The research carried out on Arabic language is typically scattered and outside from the Arab world. There are no specialized conferences or symposium demeanor so far. Algorithms developed for other language scripts are not pertinent on Arabic. 3.5. Characteristics Of Arabic Characters: The calligraphic nature of the Arabic set is eminent from other languages in several ways. For example, Arabic text is written from right to left. No upper or lower cases subsist in Arabic, but sometimes the last character of a word is considered as upper case because its always remains in its full form. Arabic has 28 fundamental characters, of which 16 have from one to three dots. Those dots discriminate between the otherwise similar characters. Additionally, three characters can have a meander like stroke. The dots are called secondaries and they are located above the character primary part as in ALEF (?), or below like BAA (?), or in the middle like JEEM (?). Written Arabic text is cursive mutually in machine-printed and hand-written text. Within a word, some characters unite to the preceding and/or following characters, and some do not connect. The connectivity of characters consequences in a word having one or more connected components. We will refer to each connected piece of a word as a sub-word. The shape of an Arabic character depends on its location in the word; a character might have up to four different shapes depending on it being isolated, connected from the right (beginning form), connected from the left (ending form), or connected from both sides (middle form). A distinguishing feature of Arabic writing is the presence of a base-line. The baseline is a level line that runs through the connected portions of text (i.e. where the characters connection segments are located). The baseline has the highest number of text pixels. (See figure 3.2.) Characters in a word may overlie vertically (even without touching). Arabic characters do not have permanent size (height and width). The character size varies according to its pose in the word, Characters in a word can have diacritics. These diacritics are written as strokes, placed either on top of, or below, the characters. Poles apart diacritic on a character may change the meaning of a word. Readers of Arabic are accustomed to reading un-diacritical text by deducing the meaning from context. Numerous characters can combine vertically to form a ligature, especially in typeset and handwritten text. Arabic words may perhaps consist of one or more sub-words. Each sub-word may have one or more characters, because some Arabic characters are not joinable to others from the left side. As an example, the word Ketab ( ) consists of two sub-words: Keta ( ) which consists of three characters and BAA( ?) which is a single character. There are merely three characters that represent vowels, ? , ? or ? . However, there are other shorter vowels represented by diacritics in the form of over scores or underscores but practice of over score and underscore in Arabic is less Dots may materialize as two separated dots, touched dots, hat or as a stroke. Another style of Arabic handwriting is the arty or decorative calligraphy which is usually full of overlapping making the identification process even more difficult by human being rather than by computers. 3.6. Summary: Arabic script includes its cursive nature of writings, right to left style of writing and change of form and shape when a character is placed at different locations of a word, loops, half closed characters and dots on above or below a character. National Language Authority defined 32 characters set but it has 21 working characters beside numeral and diacritics. Chapter 4 ARABIC CHARACTER RECOGNITION 4.1. Phases Of Arabic Character Recognition: In an offline character identification system, the user scans a particular script, runs the OCR and gets the documents saved in a file format of his choice. The alteration of the text from the scanning phase to the final document involves a number of phases that are transparent to the user. The proposed system can be implemented in the following steps: Image Acquisition; Digitization; Preprocessing; Feature extraction; Recognition. Figure 4.1 shows the componen
Experiencing Slavery Through Octavia Butlers Kindred Essay -- Octavia
Authors of fiction often write about the human condition as a way to connect with a broad range of readers. Unlike factual textbooks, fiction gives characters feeling and emotion, allowing us to see the story behind the basic details. In many cases, readers gain a new perspective on a period of time by examining a fiction novel. In Kindred, by Octavia Butler, the near death experiences of Rufus Weylin transports a 20th century African American woman named Dana to the ante bellum South to experience exactly what itââ¬â¢s like to be a slave. Through her day-to-day life on the Weylin plantation, the reader begins to understand just how complex slavery is and how it affects both the slaves and the plantation owners; thus, giving new meaning and an added sense of realism to this 19th century practice of exploitation. On the surface, slavery was a system in which Africans were bought and sold as property. However, by reading Kindred, the reader begins to realize that the system was much more complex. In other words, both plantation owners and slaves focused on retaining their property or staying alive, respectively. Butler illustrates this throughout the text. Seen as inferior and subhuman by whites, slaves were often only able to trust and rely on each other. When Dana is transported to the 19th century, she realizes her need to escape. However, the only way she can do this is by allowing Rufus to lead her in the right direction. As he does this, she wonders whether he is setting a trap for her. She says, ââ¬Å"I realized suddenly how easy it would be for him to betray meââ¬âto open the door and run away or shout an alarmâ⬠(32). In addition to illustrating a lack of trust for whites, this scene also depi... ...up call. Work Cited Butler, Octavia. Kindred. Boston: Beacon Press, 1979. Hairston, Andrea. ââ¬Å"Octavia Butler ââ¬â Praise Song to a Prophetic Artist.â⬠Daughters of Earth: Feminist Science Fiction in the Twentieth Century. Middeltown: Wesleyan University Press, 2006. Works Consulted Alaimo, Stacey. ââ¬Å"ââ¬â¢Skin Dreaming': the Bodily Transgerssions of Fielding Burke, Octavia Butler, and Linda Hogan.â⬠Ecofeminist Literary Criticism. Chicago: University of Illinois Press,1998. Francis Consuela, ed. Conversations with Octavia Butler. Jackson: University Press Mississippi, 2010. Govan, Sandra Y. ââ¬Å"Homage to Tradition: Octavia Butler Renovates the Historical Novelâ⬠Melus 13 Nos. 1-2 (spring-summer 1986): 79-96 Mitchell, Angelyn. ââ¬Å"Not Enough of the Past: Feminist Revisions of Slavery in Octavia E. Butlerââ¬â¢s ââ¬Å"Kindred.â⬠â⬠Melus, Vol 26, No #, 2001
Friday, July 19, 2019
Ancient greek art :: essays research papers
Art of ancient Greece My report is on ancient Greek art mainly sculptures and vase art I will also be writing about a day in the life of a Greek artist. Artists in ancient Greece varied from designing coins, mosaics, gem engravings, architecture, pottery and sculptures. Iââ¬â¢m also going to talk about what tools the sculptors used and the various methods used to make pottery and vases. The second part of my report will be about a day in the life of a Greek artist for example how they were treated were they considered middle class, upper class or were they looked down upon also what were their daily tasks, how did they would start their day and end it. The main reason I picked this topic is because art is a very important key to learning about a cultures history and beliefs. Greek art has influenced many other countries especially Rome most of their art and art from the Italian renaissance were copies of original Greek works of art. Sculpture Sculpture is one of the most important parts of Greek art since it is almost the only art form that has survived in some quantity. The ancient Greeks were especially known for their sculpture because their sculptures were extremely life like and beautiful. It was important to the ancient Greeks to combine passion and reason in their sculpture. Greek sculptures were mostly of the human form since they looked at their gods as having a human form. All of the sculptures were nudes of males because society looked down upon female nudity until latter on in time when you started to see sculptures such as the Venus di Milo, which was modeled after Aphrodite (Wikpedia the free encyclopedia. Wikpedia.11 Nov 2004. 12 Nov 2004 http://www.wordiq.com/definition/Greek_art ). One of the most amazing sculptures is the colossus sculpture of Zeus in Olympia it was one of the 7 wonders of the ancient world. Ancient writers said that it stood 12.40 meters high, 6.65 meters long and 9.76 meters deep the b ody of Zeus was made of ivory followed by a robe made of gold topped with a silver olive wreath and his throne was decorated with mythological scenes painted by Panainos and Kolotis the statue itself was created by Phidos. Michael Lahanas. 25 Dec 2002. 11 Nov 2004 (http://www.mlahanas.de/Greeks/Arts/ZeusStatue.htm). Another great sculpture is the colossus Athena Parthenos. This sculpture just like the colossus statue of Zeus was made of gold and ivory and had various mythological engravings in her shield, helmet and pedestal.
Thursday, July 18, 2019
Assignment 26 Safeguarding
15 ASSIGNMENT 26 UNDERSTAND HOW TO SAFEGUARD THE WELLBEING OF CHILDREN AND YOUNG PEOPLE TASK A BREIFING NOTES FOR NEW WORKERS HOW TO SAFEGUARD THE WELL-BEING OF CHILDREN Every child or young person has the undeniable right to grow and develop in a safe environment that safeguards them from abuse and maltreatment, to enable them to have the best available life chances to develop into young adults. There is no single piece of legislation for safeguarding children in the UK but lots of laws and guidelines which are changing all the time with new legislation.This is passed by Westminster, the Welsh Assembly Government, Northern Ireland Assembly and the Scottish Parliament this is Statutory Law. The way courts interpret laws is known as Case Law which can have an effect on changing Statutory Law. Child Protection legislation is in 2 categories Civil law and Criminal law. 16. Civil Law is in 2 areas Public Law which puts systems and processes to reduce the risk of children coming to harm a nd says what action should happen if they are at risk. Private Law sorts out family contact and divorce. Accompanying material: Promoting Wellbeing and ResilienceCriminal Law deals with people who have offended or are at risk of offending against children. The Children and young Persons Act 1933 is the oldest piece of legislation with only parts of it still in force today, it gives a list of offences against children known as Schedule One Offences. These include sexual assault, different forms of abuse and maltreatment ranging from murder to neglect. Anyone found guilty of one or more of these offences becomes a Schedule One Offender regardless of their age or sentence and this status will stay with them for life.They will be monitored by the local authorities who keep a record of where they live and who with, they need to go to the police station to sign a register on very regular bases to prove that they are and still living where logged Sex offenders Act 1997. Children Act 1989 is the bases of the current child protection system. It has a number of principles The Paramountcy Principl e that means a childââ¬â¢s welfare is paramount when making decisions about their upbringing, a court needs to know the childââ¬â¢s feelings and what they want and only make an order if itââ¬â¢s better for the hild than not making one, where possible retaining family links and the childââ¬â¢s home. Parental Responsibility was introduced which is ââ¬Å"the rights, responsibilities and duties by law a parent of a child has regarding the child and their propertyâ⬠. It also states the local authority has a duty to investigate 17. and protect if they have reasonable cause to think a child is suffering or likely to suffer any sort of harm. Likewise has a duty to provide ââ¬Å"services for children in need and their familiesâ⬠.England and Wales have a separate document working together to Safe guard Children 2006 which emphasises the responsibilities of Professionals towards children at risk and to work together with other agencyââ¬â¢s/authorities. The Welsh Asse mbly Government 2006 working together under the Children Act 2004, The Children (Northern Ireland) Order 1995 and the Children (Scotland) Act 1995 all share the same principles but have their own guidance, as Children Act 1989.The death of Victoria Climbie by her carers, led to an inquiry into how she and others over the years died, the Lambing Report made by Lord Laming criticised the approach to protecting children in society thus led to EVERY CHILD MATTERS GREEN PAPER which in turn led to the Children Act 2004 as services for children were still not working together to protect and identify vulnerable children. This brought in childrenââ¬â¢s directors who have the responsibility for education, Local authority and childrenââ¬â¢s social services. Lead Councillors who have political responsibility for child welfare.A Common Assessment Framework to help notice welfare needs for agencies. 18. Local Safeguarding Childrenââ¬â¢s Boards who have statuary powers to make sure all se rvices (education, police, NHS Social Services youth justice system) work together promoting the wellbeing and make arrangements to safeguard and promote the welfare of children and investigate all child deaths in their area. Bichard Inquiry where a caretaker who was known to be a danger to children by one police authority, whoââ¬â¢s vetting CRB check didnââ¬â¢t flag this up by another authority.This brought in the Safeguarding Vulnerable Groups Act 2006 which made a centralized vetting and barring scheme for people working with children. Working with Northern Irelands safeguarding vulnerable groups (NI) order 2007 and Scotlandââ¬â¢s protection of vulnerable groups (Scotland) Act 2007 makes a robust system for vetting staff and barring people who are unsuitable to work with children across the whole of the UK. The Children Act 2004 made it illegal to hit a child if it causes mental harm or a lasting mark on the skin.Sexual Offences Act 2003 updated the legislation relating to offences against children to include grooming, abuse of a position of trust, child trafficking; this also covers offences committed whilst abroad by a UK citizen. 19. Female Genital Mutilation Act 2003 made it a criminal offence for Uk nationals or permanent UK residents to take or help take a girl abroad to carry out genital mutilation. The Criminal Justice and Immigration Act 2008 says people who commit child sex offences abroad, even if itââ¬â¢s not illegal in the country they committed it will still face prosecution in the UK.Data Protection Act Organisations holding personal data to keep it secure, use it only when needed and accurate and kept up to date. Child protection with in a wider concept of safeguarding All agencies, services and authorities not only have a duty to safeguarding children from neglect or abuse but to have a Staying Safe Action Plan enabling every child to enjoy safe environment wherever they spend their time. Itââ¬â¢s vital that carers/staff have a good understanding of the risks to childrenââ¬â¢s safety.By having an up to date Safety representative making risk assessments on the venue and activities under taken, keeping them safe from accidents and promoting their welfare in a safe and healthy environment. An action Plan to safeguard from bulling, crime and in some beliefs forced marriages need to be in place. This affects the day to day child care working place by; All employeesââ¬â¢ to be CRB checked and a duty to inform the Safeguarding Authorities if any staff or volunteer poses a threat to the children. 20.Staff must sign a confidentiality agreement, stating not to discuss or post any details of the children by word or internet to anyone except staff or local authorities if needed. Health and Safety with risk assessment made on the venue and activities taking place there. Have all windows and doors locked/secure so the children canââ¬â¢t get out and strangers canââ¬â¢t get in. Visitors to the venue can onl y be allowed in, if they are known/expected to staff and/or identification is shown. Visitors need to be signed in the visitorââ¬â¢s book and signed out again when they leave the building.Have a policy for the protection of children and arrangements to liaise with local safeguarding authorities Log all comments or incidents you observe and deem to be potentially harmful to establish a file, and contacting Social Services or Child Protection if a case is proving likely. Staff to be Qualified and appropriate training kept up to date i. e. First Aid, Health and Safety, Food Hygiene and Child Protection. All outings to be risked assessed, children to wear high visible jackets, the correct ratio of staff to children and a list of all children with contact details of their carer and consent for them to go on the outing.To hold all parent contact details and medical needs of all children. 21. To have a senior adequately trained member of staff to undertake all of the above. Inquiries an d Serious Case Reviews processes are required when a child dies and neglect or abuse is suspected or known to be a factor of the death and they are called in by the Local Safeguarding Childrenââ¬â¢s Board (LSCB) they involve all local Authority Childrenââ¬â¢s Services, Police, Health, School or any other agency felt needed. All involved services make a management review of its practices to see if any changes need to be made.An independent overview report is done which looks at the management reports and they make recommendations, they are commissioned by the LSCB. Ofsted are notified by the Local Authorities of all cases that lead to a Serious Case Review whether it a death or suffered harm as a result of abuse/neglect or there are concern/media coverage raised about a professional practice. The process used by my work setting regarding data information, information handling and sharing is they hold information on children in order to support their development, progress and pr ovide pastoral care and to assess how we are doing as a whole.The information consists of contact details, attendance, ethnic groups, relevant medical needs and any special educational needs. Sometime we are required to pass on data to Local Authorities; they will make an assessment of any special educational needs. Dept. Education and skills use the data for research and statistical purposes to allocate funds and improve education policy and agencies such as Ofsted they use data about progress, performance of children to help inspectors to evaluate the Early Learning settings and part of Ofstedââ¬â¢s assessment of effectiveness of 22.Education initiatives and policy and Qualification and curriculum Authority use information about children to administer national assessments such as the Foundation Stage Profile. At 5yrs assessment are made on all children and passed onto Local Authority. We hold information including, contact details, progress reports, relevant medical information , attendance and accident/injury records and records of observation and assessment of childrenââ¬â¢s achievement and development. Attached is a copy of our confidentiality policy and procedure.TASK B 1. Safeguarding children is important because far too many children experience abuse and/or neglect by their parents/carers. This is very sadly rising from 25,700 in 2003 to 26,400 in 2006 in England alone. 2. A person-centred approach is important as Every Child Matters so they can be healthy, stay safe, enjoy and achieve, make a positive contribution and enjoy economic well-being, having a national framework to aid the joining of all the services, to plan and meet the needs of individuals rather than a group.All children have the right to have their voices heard regarding plans and events in their lives as stated by the United Nation Convention on the Rights of the Child. 3. What is meant by a partnership working in the context of safeguarding children is people and agencies who ar e involved with the welfare of a child working with professionals such as Child minders, Health visitorââ¬â¢s, police, GP, Social Workers, School and local community. 23. 4. Organisation Role of organisationResponsibility Social Services Assessing childrenââ¬â¢s needs in the community.The wellbeing, protection and health . of the child NSPCC Identify and prevent child crueltyChild protection, ensuring an appropriate and speedy response Health VisitorAssess child development Health of the young child and work with . S/Services and Police and agencies GPHealth care to the communityGet the appropriate agencies involved and work alongside themProbation Support convicted people rehabilitate Supervise offender to reduce reoffending Protecting the public Police Criminal proceedings in Safeguardingto investigate any criminal offences. 24. School Educate young peopleMonitor the child and work with S/Service . and Child Protection Psychology Service CounsellingWork with the child and s upport them with issues regarding to the abuse Leisure groups i. e. (Scouts) Teach life skills/sportsWork with the Agencies involved and . o be trained in Child Protection. Child MinderTake care and look after young people To be trained in Child Protection so they can . Identify early abuse and work with other agencies Task C It is important to keep children protected in the work setting, as parent/carers intrust their children into your care to keep them from harm and they need to be confidant that their child is safe, failure to do so is a breach of professional values.There are policies that protect the child and adult who works with them. 25. Physical contact: Have clear policies on how to manage it. Young children need physical contact sometimes when they hurt themselves, fallen over etc. where a cuddle can help them to recover back to play, as well as medical help if needed. Too much can be easily mistaken and people have lost their jobs and reputations, you must always make sure you are clear at what is acceptable and have a clear open play area for all to see.With very young children and babies, intermit contact is used, such as nappy changing or wet clothes. Policies are there to safeguard you and the child, never do this with a door closed or out of sight of your colleagues. Photos: written consent from the parents for photos to be taken and used within the setting and their journals or publications/newsletters. Always get parents to sign to say they will only use photos/videos of the children i. e. concert and nativity for their own personal use and not to be put on the internet or social networking sites.CRB Checks: Are made on all staff to safeguard the children. Staff are in a position of trust by the parent/carer and the child. Children look up to and respect people in positions of trust, so think very carefully about your own behaviour and example you set. Listening to children can give you a lot of information and sometimes things of concern, if that is the case try not to agree to keep it a secret, tell them you will share it with your manager. Make sure you record all details and report it if you are concerned about their welfare. 26.Whistle blowing: If you have any idea of poor practice, whether itââ¬â¢s a colleague or manager you must report it and not ignore it. Approach another member of staff or managers tell them and put your concerns in writing with all the facts, make sure something is done. You have the right to be protected from the person you have raised concerns about (UK Public Interest Disclosure Act 1998) Outings: need to be risk assessed, outlining traffic danger, equipment, buildings and parks youââ¬â¢re visiting and the weather too and minimise or delete the hazard using control measures. I. e. walking in the street.Hazard: traffic and the child wondering off, so make sure you have the correct ratio of adults to children on an outing and to wear hi vis wear. The weather, a child getting wet or cold, so make sure you have the correct clothes. Steps can be difficult for young children so make sure they have adult help. Task D In the context of safeguarding children there are recognisable signs that can indicate abuse, neglect are taking place. Not all signs actually mean it is, for instance some African/Asian children can have dark blue like areas on their lower back and buttocks known as Mongolian Blue Spot.Darkened skin or birthmarks can be mistaken for bruising. One of the first signs is Emotional and behaviour rather than physical marks. Emotional Abuse is where love, acceptance and approval is not given and constantly been blamed or criticized. Signs of this can include low self-esteem, neurotic behaviour, hair twisting, continual rocking, self-harm, development delay or sudden change or problem with speech such as stammering, extreme 27. withdrawal or aggression. Emotional abuse is usually linked with neglect.Physical abuse is where a child is harmed or hurt by hittin g, beating with objects, kicked, shaken or thrown and can cause bruising, cuts, injuryââ¬â¢s (broken bones) or even death. Signs of this can be wearing too much clothing trying to cover up, refusal to change for PE or take clothes off in the warm weather. Burns and injuries that are unexplained and reoccur, bald patch in their hair, frightened to be touched and shying or dodging back if approached and aggressive behaviour towards others and themselves. Look out for grasp marks on the body i. e.Arms, neck, chest, knees and shoulderââ¬â¢s, finger marks on their cheeks and outline of objects like belt buckle on their buttocks. Neglect is where a parent/carer doesnââ¬â¢t provide shelter, warmth, food that is nourishing, clothes and protection. Possible signs of this could include constantly hungry or stealing food the lack of normal body weight, poor personal hygiene and dress, untreated medical issues, poor or if any social relationships, constant tiredness and destructive ten dencies. Sexual abuse is when a child is persuaded or forced into taking part in sexual acts/situations.This ranges from being shown sexual images, being touch inappropriately, harassed by sexual comments and suggestions and forced to have sex. Signs of this can be sexual knowledge/behaviour far more ahead of their age, donââ¬â¢t like being touch or close to people or removing clothing for examination or PE at school, start to bed wet and soil day and night, withdrawn and not being able to concentrate, regressing to younger behaviour such as thumb sucking, become insecure, loss of appetite, trying to be over perfect, a sudden dislike to be left with someone (uncle, friend, babysitter etc. and drawing sexual images. 28. D2 Action Description 1. ListenListen carefully to what they say. 2. ReactionDonââ¬â¢t look shocked or ask leading questions. 3. CommunicateTalk at the childââ¬â¢s pace without pressure. 4. BelieveAccept what the child is saying. 5. AssuranceTell them they ar e right to tell someone. 6. Never PromiseNever promise to keep it a secret. 7. Never JudgeNever put the perpetrator down as they could still love them. 8. ReportReport it to your manager. 9. Log Write all the facts down. 10. AlertAlert the appropriate authorities.D3 Example of the rights children and their carerââ¬â¢s has in cases of harm/abuse. 1. The child has the right not to be subjected to repeated medical examination and questioning after an allegation of abuse be it physical or sexual in nature. 29. 2. Members of the family have the right to know what is being said about them and have an input to important discussions about theirs and the childrenââ¬â¢s lives. 3. Children have the right to have their views taken into account about their future and to be kept fully informed in processes involving them and dealt with sensitively.Task E Bulling: there are different types of bulling homophobic because of gender differences, racist due to different ethnic/religious backgroun d, disabilities where they might be in a wheelchair/callipers, special educational needs such as Autism etc. and electronic bulled via the internet/texting. This can be done physically by hitting, kicking, pinching and any violent threats. Verbally name calling, persistent teasing, spreading of rumours and insults/sarcasm. Emotional bulling is when someone is isolating by excluding and not talking to them, torment and humiliation.Cyber bulling is when information is used to cause upset and hurt to somebody by the use of the internet, mobile and technology. Any type of bulling can make a child or young person feel depressed, isolated, sad with a low self-esteem, shy, run away and even suicidal. Policies and Procedure Management have the duty to implement an Anti-Bulling Policy and ensure all staff is aware of it and how to deal with bullying. The manager ensures that all children begin to learn that bulling is wrong and unacceptable behaviour and monitor that it is being implemented. 30. The manager will ensure all staff is sufficiently trained to deal with incidents.Staffs take all forms of bulling very seriously and intervene to prevent incidents happening. A record of any incidents is kept on file and the manager notified. If staff witness an act of bulling they will do all they can to support the person or persons being bullied, if a child is bullied over a period of time after discussion with the manager, the parent will be informed. The pre-school will do all they can to help the child improve their behaviour and make them aware their actions are not acceptable. If the bulling persists the parent will be asked in to discuss this with the manager.Parents who might be concerned that their child is being bullied or suspect them being bullied, should contact the Pre-school manager immediately. Parents have a responsibility to support the Pre-schoolââ¬â¢s anti bullying policy and actively encourage their child to be a positive member of school life. Parents are also expected to help develop their childââ¬â¢s social skills, in support of the Pre-schools ethos. Story of Bulling A young teenage girl, who had buck teeth and a personal odour problem, enjoyed the internet and social network site as she didnââ¬â¢t have many friends and was a bit of a loner.Her family thought she was a computer whiz as she was very good at ICT so didnââ¬â¢t keep too much of an eye on her, as this was her only 31. Social thing she did. It was during the summer holidays she got a friends request from a boy at school, she accepted the request and started chatting. Over the next 6 weeks, he asked her to be his girlfriend as he had always fancied her, she accepted. They chatted for hours sharing some very intermit things and experiences, she was totally in love with him and he told her he loved her too. She was really looking forward to meeting up with him at school when they went back.On the first day of school they had arranged to meet by the water foun tain in the playground, when she got there she saw him standing waiting along with a large group of girls and boys laughing, calling her names and repeating some of the intermit things she had told him, she realised it was a horrible prank and she was devastated. Over the next few weeks she was so upset and got more and more depressed, not eating and totally shutting herself away and refusing to go to school some days saying she didnââ¬â¢t feel well, as the rumours spread and comments on the internet got worse.Her parents tried talking to her but she just said ââ¬Å"she was fineâ⬠and they put it down to teenage and her period pains until one morning when they found her dead, she had taken an overdose and in her hand was a note to her parent saying ââ¬Å"Iââ¬â¢m sorryâ⬠. Looking back over this story the girl could still be alive if her computer access was monitored in an area open for the family to see. Her teeth could have been seen by an Orthodontic and she could have been taught about personal hygiene at home. School could have discussed this with her and if need be the parents as well.Encouraging her to join after school clubs could also have helped. The school should have noticed the signs of bullying and acted 32. upon it giving the girl support and reassurance whilst dealing with the bullies and explaining that their actions were unacceptable and how it affects people and how they would feel if it was done to them. School should have liaised with the family about their concerns. Task F 1. Giving young people/children praise and encouragement will help with their self-confidence.Teaching them to be more assertive while still respecting others needs and encouraging tolerance and cooperation between their peers and others will help boost childrenââ¬â¢s self-esteem. 2. Itââ¬â¢s important to support resilience when working with children/young people because it helps them deal and cope with different situations, whether they are good o r bad as they get older and develop into young adults. 3. This can be achieved by the family giving the child love and stability, having a good and secure early attachment, a good sense of self identity. In the work place you could o this by helping them to act independently and to encourage them to try new and different things. 4. Children/young people need to develop strategies to protect themselves and make decision about being safe, as this teaches them what is acceptable behaviour and what isnââ¬â¢t. Itââ¬â¢s very important they are comfy 33. with whom they are with, what they are doing and what is being done to them. You can support them with this by being approachable to talk too about their concerns and to be caring and reassuring as possible. Children need to learn how to behave in activities and the danger some behaviour has and the consequence it could cause.Road safety is also very important to teach children to keep safe. Educating children about the dangers that some adults pose and how to minimise them, including how to keep safe while they are using the internet/social network sites. Making them aware of the dangers of substance abuse and provide them with age related sex/relationship education including sexual health and safe sex advise and where they can also seek help if they cannot talk to you. 5. Ways of how to empower children/young people to make positive choices. 1 Teach young children about their bodies and how it works.As they get older explaining puberty and how their bodies are changing into young adults and to give them sex/relationship education including contraception/safe sex and sexually transmitted diseases and aware of other agencies that can help them if they need it. 2 Road safety you start when they are very young by holding their hands to cross the road telling them the Green cross code (copy of the code attached) teaching them to cross safely, then moving onto crossing with you without holding your hand, working to being able to cross on their own with supervision, until they can do it without adult supervision. 4. 3. The internet. When young children are using the internet they should have parental supervision and parental security put into place on the computer reducing the risk of assessing inappropriate sites. The computer should be in an open downstairs place where it can be seen (not hidden away in the child bedroom). Ensure you child isnââ¬â¢t using social network sites under age i. e. Facebook has a minimum age of 13yrs. and when they do use these sites, teach them to put their security settings on so only friends can view their age. Never to befriend someone they donââ¬â¢t know or give out personal details/photos even if they say they are the same age, as this could be a much older person grooming or trying to exploit them. These sites can also have the danger of cyber bulling, so give the child the effective advice of what to do if any of this happens. Always check what your c hild is assessing and who they are communicating to, even when they are older teenagers. Task G IssueRiskPossible consequences Being online 1Gambling sites flood the network.Addiction and crime to support their habit. 2 Exposure to violent material. They could imitate the violence seen. 35. 3Grooming/PaedophilesPhysical harm and psychological impact. Mobile phones RiskPossible consequences 1Bulling via textlow self-esteem, depression, self-harm, health if not eating well. 2Health Itââ¬â¢s 5 times more likely of children developing cancer due to excessive useof mobile phone as childrenââ¬â¢s skulls are thinner so the radiation penetrates deeper. 3Pornography Exposure to sexually explicit material, become sexually active under age. AREAWAYS OF REDUCING RISK Social networking1. Safe security settings. 2. Only befriend/chat to people you know. Internet use1. Computer to be in an open area for all to see. 2. Parental controls 36. Buying online1. Make sure itââ¬â¢s a safe padlock ed site. 2. Buy from reputable companies; look for contact details and returns/delivery policies. Using a mobile phone1. Only talk and text to people you know. 2. Restrict the time children use mobile phones to reduce the amount of radiation penetrating.
Subscribe to:
Posts (Atom)